差别
这里会显示出您选择的修订版和当前版本之间的差别。
两侧同时换到之前的修订记录 前一修订版 后一修订版 | 前一修订版 | ||
fpga_arduino_8051 [2019/10/04 15:38] gongyu |
fpga_arduino_8051 [2019/10/04 15:49] (当前版本) gongyu |
||
---|---|---|---|
行 186: | 行 186: | ||
##### 步骤5:定制自己的硬件外设 | ##### 步骤5:定制自己的硬件外设 | ||
- | |||
如果用户需要增加新的外设的话, 具体步骤如下(以LCD为例) \\ | 如果用户需要增加新的外设的话, 具体步骤如下(以LCD为例) \\ | ||
1. 编写RTL模块, 并且simulate, 比如 \\ | 1. 编写RTL模块, 并且simulate, 比如 \\ | ||
行 208: | 行 207: | ||
#### 相关设计资源 | #### 相关设计资源 | ||
- | Copy from PulseRain Technology \\ | + | * {{::step_fpga_m10_user_guide_cn.pdf|STEP FPGA FP51-1T MCU中文用户手册 }} \\ |
- | {{::step_fpga_m10_user_guide_cn.pdf|STEP FPGA FP51-1T MCU中文用户手册 }} \\ | + | * {{::datasheet_fp8051_1t.pdf|FP51-1T Datasheet}} \\ |
- | {{::datasheet_fp8051_1t.pdf|FP51-1T Datasheet}} \\ | + | * {{::pulserain_8_bit_mcu_trm.pdf|FP51-1T Technical Reference Manual}} \\ |
- | {{::pulserain_8_bit_mcu_trm.pdf|FP51-1T Technical Reference Manual}} \\ | + | * [[https://github.com/PulseRain/Mustang/tree/step_fpga|Repository for FPGA]] \\ |
- | [[https://github.com/PulseRain/Mustang/tree/step_fpga|Repository for FPGA]] \\ | + | * [[https://github.com/PulseRain/Arduino_M10_IDE/tree/step_fpga|Repository for Arduino IDE package]] \\ |
- | [[https://github.com/PulseRain/Arduino_M10_IDE/tree/step_fpga|Repository for Arduino IDE package]] \\ | + | * [[https://github.com/PulseRain/M10_high_speed_config_rtl|TRM for M10 High Speed Configuration]] \\ |
- | [[https://github.com/PulseRain/M10_high_speed_config_rtl|TRM for M10 High Speed Configuration]] \\ | + | * [[https://github.com/PulseRain|Repository for Peripherals]] \\ |
- | [[https://github.com/PulseRain|Repository for Peripherals]] \\ | + |